Code grepper

Grepper code

SQL – How To Check If A String Contains Numbers
NOVEMBER 19, 2009 ROB BAMFORTH2 COMMENTS
Use the PATINDEX function to check for an integer value continued in the string.

If PATINDEX returns a value greater than 0 then the string does contain an integer, you can use PATINDEX to determine the position of the integer within the string.

If PATINDEX is not greater than zero then the string does not contain an integer value.

DECLARE @string varchar(50)
SET @string = ‘this is a string with numb3rs in it’

IF PATINDEX(‘%[0-9]%’,@string) > 0 
      PRINT ‘YES, The string has contains the number ‘ +
                  substring(@string,PATINDEX(‘%[0-9]%’,@string),1) +
                  ‘ at position ‘ +
                  cast(PATINDEX(‘%[0-9]%’,@string) as char)
ELSE 
      PRINT ‘NO, The string does not have numbers’

Code grepper

I am glad to see you on code grepper community.
https://www.codegrepper.com/app/profile.php?id=50909
I will be happy to solve your Python problems!

Code grepper

alias pycharm="open -a /Applications/PyCharm\ CE.app"

Code grepper

Did Code grepper go down again?!

Grepper code

/*
  WiFiAccessPoint.ino creates a WiFi access point and provides a web server on it.

  Steps:
  1. Connect to the access point "yourAp"
  2. Point your web browser to http://192.168.4.1/H to turn the LED on or http://192.168.4.1/L to turn it off
     OR
     Run raw TCP "GET /H" and "GET /L" on PuTTY terminal with 192.168.4.1 as IP address and 80 as port

  Created for arduino-esp32 on 04 July, 2018
  by Elochukwu Ifediora (fedy0)
*/

#include <WiFi.h>
#include <WiFiClient.h>
#include <WiFiAP.h>

#define LED_BUILTIN 2   // Set the GPIO pin where you connected your test LED or comment this line out if your dev board has a built-in LED

// Set these to your desired credentials.
const char *ssid = "yourAP";
const char *password = "yourPassword";

WiFiServer server(80);


void setup() {
  pinMode(LED_BUILTIN, OUTPUT);

  Serial.begin(115200);
  Serial.println();
  Serial.println("Configuring access point...");

  // You can remove the password parameter if you want the AP to be open.
  WiFi.softAP(ssid, password);
  IPAddress myIP = WiFi.softAPIP();
  Serial.print("AP IP address: ");
  Serial.println(myIP);
  server.begin();

  Serial.println("Server started");
}

void loop() {
  WiFiClient client = server.available();   // listen for incoming clients

  if (client) {                             // if you get a client,
    Serial.println("New Client.");           // print a message out the serial port
    String currentLine = "";                // make a String to hold incoming data from the client
    while (client.connected()) {            // loop while the client's connected
      if (client.available()) {             // if there's bytes to read from the client,
        char c = client.read();             // read a byte, then
        Serial.write(c);                    // print it out the serial monitor
        if (c == '\n') {                    // if the byte is a newline character

          // if the current line is blank, you got two newline characters in a row.
          // that's the end of the client HTTP request, so send a response:
          if (currentLine.length() == 0) {
            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
            // and a content-type so the client knows what's coming, then a blank line:
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println();

            // the content of the HTTP response follows the header:
            client.print("Click <a href=\"/H\">here</a> to turn ON the LED.<br>");
            client.print("Click <a href=\"/L\">here</a> to turn OFF the LED.<br>");

            // The HTTP response ends with another blank line:
            client.println();
            // break out of the while loop:
            break;
          } else {    // if you got a newline, then clear currentLine:
            currentLine = "";
          }
        } else if (c != '\r') {  // if you got anything else but a carriage return character,
          currentLine += c;      // add it to the end of the currentLine
        }

        // Check to see if the client request was "GET /H" or "GET /L":
        if (currentLine.endsWith("GET /H")) {
          digitalWrite(LED_BUILTIN, HIGH);               // GET /H turns the LED on
        }
        if (currentLine.endsWith("GET /L")) {
          digitalWrite(LED_BUILTIN, LOW);                // GET /L turns the LED off
        }
      }
    }
    // close the connection:
    client.stop();
    Serial.println("Client Disconnected.");
  }
}

Code grepper

Welcome to Code Grepper. You can count on me for PHP! https://www.codegrepper.com/app/profile.php?id=237313

-1

Similar codes

0 vote153 views1 answer
Autopy in python install
Python
0 vote150 views1 answer
Python data frame check if any nan value present
Python
5 votes217 views4 answers
Import user in django
Python Django
0 vote153 views1 answer
Use nltk to remove stop words
Python
0 vote159 views1 answer
Matplotlib despine
Python
24 votes170 views6 answers
Remove last element from list python
Python
0 vote160 views1 answer
Python Remove Character from String using replace()
Python
1 vote115 views1 answer
Python get keys as list
Python
0 vote162 views1 answer
Run all python files in a directory in bash
Python
1 vote163 views1 answer
Vector in python
Python